Nexen Group, Inc. has introduced the UniTrax motor-ready linear axis, a configurable linear motion system built on the company's Roller Pinion System (RPS). The product is designed to reduce the engineering, component selection, and installation work required of original equipment manufacturers (OEMs), machine builders, and system integrators. By combining the primary linear motion components into a single purpose-built system, UniTrax addresses a common bottleneck in machine development: the time-consuming process of sizing, mounting, and assembling individual parts.
The significance of the announcement lies in its potential to accelerate machine development cycles. Nexen estimates that UniTrax can save approximately 19 hours of labor compared with sizing individual components, designing mounting features, and separately assembling and installing the components. For OEMs and integrators operating on tight deadlines, that time savings can translate directly into faster time-to-market and lower engineering costs. The product was developed in response to customer requests for an easier way to implement Nexen's linear motion technology, following an initial voice-of-customer survey that identified the need for a more complete system.
"Customers wanted the performance of our Roller Pinion System without having to engineer and assemble every part of the axis themselves. UniTrax gives them a configurable axis that reduces integration work and helps them move more quickly toward a production-ready machine," said Craig Pellin, vice president of sales and marketing at Nexen Group.
UniTrax is available in nominal 1-meter and 1.5-meter lengths, with custom lengths shorter than 1.5 meters available upon request. Customers specify the axis length and planned gearhead, allowing Nexen to configure the system for specific applications. The axis includes the RPS drive system, guide rail, and carriage plate; the customer supplies the servo motor, gearhead (if needed), and cable management system. For applications requiring additional load support, a second guide rail and larger carriage plate can be added. The clamp-collar design accepts shaft diameters up to 22 mm, accommodating gearheads through the Stober P4 size as well as smaller shafts.
Performance specifications include zero backlash, repeatability of ±20 micrometers, and positional accuracy up to ±80 micrometers in a fully supported top-mount configuration. The system reaches speeds up to 4 m/s and provides an average thrust capacity of 1,000 N and a static thrust capacity of 2,000 N. UniTrax can operate without lubrication at speeds up to 1 m/s, which benefits both dirty and clean environments: without exposed lubricant, debris is less likely to adhere in dirty applications, and the system avoids introducing lubricant into clean environments. Unlike belt- and ball-screw-driven actuators that may face speed limitations as travel length increases, the RPS maintains high-speed capability over longer travel lengths.
The axis can be used as a standalone axis or configured with a larger carriage plate. Potential applications include Cartesian robots, food-processing equipment, custom drilling and cutting systems, gantry routers, nondestructive testing and measurement systems, laser and plasma cutting, welding, woodworking, and multiheaded systems operating on a common axis. By offering a configurable, motor-ready solution, Nexen is positioning UniTrax to help machine builders reduce design complexity and focus resources on their core application requirements. More information is available at www.nexengroup.com/linear-motion-control/unitrax-motor-ready-linear-axis/.


