Fitzroy Minerals' High-Grade Copper Results at Buen Retiro Signal Potential for Low-Cost Chile Mine

Fitzroy Minerals reports high-grade copper intersections at its Buen Retiro project in Chile, including 64 meters at 2.00% copper, as it advances toward a maiden resource estimate and preliminary economic assessment.

Chicago Metrowire Staff
••Business
Fitzroy Minerals' High-Grade Copper Results at Buen Retiro Signal Potential for Low-Cost Chile Mine

Fitzroy Minerals Inc. has reported additional high-grade copper intersections from ongoing drilling at its Buen Retiro Copper Project in Copiapo, Chile, results that could strengthen the project's economic case as the company prepares its first mineral resource estimate and a preliminary economic assessment (PEA). The latest assays, disclosed via NEWMEDIAWIRE, come from diamond drill holes BRT-DDH129 to BRT-DDH167 and reverse circulation holes BRT-RCD020 to BRT-RCD032, and are slated for inclusion in the forthcoming maiden Mineral Resource Estimate (MRE).

The most notable result was hole BRT-DDH134, which returned 64 meters at 2.00% copper from 127 meters, including 41 meters at 3.05% copper from 133 meters. This interval overlaps with historical hole BRT-DDH013, which had returned 30 meters at 3.52% copper, including 12 meters at 5.00% copper. Together, the two holes outline a zone of strong mineralization over a true width of approximately 50 meters at the base of the historical Manto Negro open pit.

Other significant intercepts included BRT-DDH146 with 107 meters at 0.48% copper from 10 meters, including 37 meters at 0.96% copper from 44 meters; BRT-DDH133 with 109 meters at 0.41% copper from 20 meters, including 13 meters at 1.10% copper from 112 meters; and BRT-DDH143 with 179 meters at 0.26% copper from 30 meters and a further 86 meters at 0.22% copper from 272 meters.

According to the company, much of the mineralization in the Tenorita and Nativo areas is copper oxide and mixed oxide-sulphide material, extending to depths of 120-150 meters. This near-surface, leachable material is amenable to low-cost processing, which could enhance project economics. CEO Merlin Marr-Johnson highlighted the significance of the results, noting that the high-grade zone at BRT-DDH134 is in near-surface, leachable material and that multiple other wide zones of good mineralization were also intersected.

Fitzroy has completed 25,634 meters of diamond drilling and 5,555 meters of RC drilling in 2026 as of November 5, for a total of 31,189 meters. Drilling continues with two diamond rigs focused on infill drilling and one RC rig testing new targets. The company has also planned an additional 3,300 meters of diamond drilling to support potential conversion of Inferred Resources to Measured and Indicated Resources for an updated MRE and a planned Pre-Feasibility Study in the second quarter of 2027. A 5,000-meter sulphide exploration program is also underway.

The maiden MRE is expected to incorporate Measured, Indicated, and Inferred Resources across the Tenorita, Nativo, and Ortuzar areas, and will form the basis for the PEA. Detailed cross-sections, such as Figure 2. Cross-section B-B’ through the historical Manto Negro open pit, including drill holes BRT-DDH013, BRT-DDH111, and BRT-DDH134 (see Figure 1), Buen Retiro, Copiapo, Chile (UTM WGS84 19S). and Figure 3. Cross-section A-A’, including drill holes BRT-RCD030, BRT-DDH131, and BRT-DDH135 (see Figure 1), Buen Retiro, Copiapo, Chile (UTM WGS84 19S)., illustrate the geology and mineralization controls. The company's website, www.fitzroyminerals.com, provides further information.

Blockchain Registration

QR Code for Blockchain Registration